QEG – Quantum Energy Generator

The Quantum Electric Generator system (QEG) is an adaptation of one of Nikola Tesla’s many patented electrical generator / dynamo / alternator designs. The particular patent referenced is No. 511,916 titled simply “Electric Generator”, and dated January 2, 1894 (see back of this manual)
The adaptation is a conversion from a linear system, to a rotary system.
The QEG prototype is scaled to produce electrical power in the range of 10-15 kW (kilowatts) continuously, and can be set up to provide either 120 Volt or 230-240 Volt single phase output. We are also planning future designs to provide 3 phase power.
Service life of the device is limited only by certain replaceable components, such as bearings, v belts, and capacitors. The basic machine should operate trouble
-free (with minimal maintenance) for as long as any good quality electro mechanical appliance, such as a quality washing machine or refrigerator.  Heavy duty mechanical
components are used throughout for reliability.
The QEG is not a complicated device, as it is designed (like Tesla’s other ‘discoveries’), to work in harmony with natural laws, rather than with the power-wasting symmetric motor and generator designs used in today’s mainstream industry.
An effective way to understand the operating principle of the QEG is to think of it as a high-powered, self-resonant oscillator (a power tank circuit), which generates high-voltage AC (15 to 25kV)  These HV oscillations are then transformed into line voltage AC out put, at current levels up to approximately 85 A. In today’s alternative energy terminology, it would be called a type of resonance machine. The circuitry that develops high power in this device is really based on an existing but under-utilized power oscillator configuration, however, the ‘quantum’ part of the design has to do with how the generator output is
tuned for maximum power.
Conventional alternators (AC generators) consume more input power than the
output power they provide. For example, one brand of power take off (PTO) alternator uses 18,000 watts (24horsepower) to develop 13,000 watts of output power. In the QEG, input power is used only to maintain resonance in the core, which uses a small fraction of the output power (under 1000 watts to produce 10,000 watts), and once running, the QEG provides this power to its own 1 horsepower motor. This is known as over-unity.
Once the machine builds up to the resonant frequency, it powers itself (self-running)
In the QEG, the exciter coil is used to provide a conduction path through the quantum field (zero point) into the generator core. This has the effect of polarizing the core, which increases power output over time
James M. Robitaille

Comments are closed.